mpls te max-reservable-bandwidth (upgrade-compatible command)

Function

The mpls te max-reservable-bandwidth command sets the maximum reservable bandwidth of a link.

The maximum reservable bandwidth of a link is not configured by default.

mpls te max-reservable-bandwidth bw-value [ bc1 bc1-bw-value ]

Parameter	Description	Value
bw-value	Specifies the maximum reservable link bandwidth.	The value is an integer ranging from 0 to 40000000, in kbit/s. The default value is 0.
bc1 bc1-bw-value	Specifies the maximum reservable bandwidth for a BC1 link.	The value is an integer ranging from 0 to 40000000, in kbit/s. The default value is 0.

Interface view

2: Configuration level

This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.

After an upgrade, this command is no longer supported, and it is replaced by the mpls te bandwidth max-reservable-bandwidth command.