The nd trust port command enables an ND trusted port in a Mesh profile.
The undo nd trust port command disables an ND trusted port in a Mesh profile.
By default, an ND trusted
port is enabled in a Mesh profile.
Format
nd trust port
undo nd trust port
Parameters
None
Views
Mesh profile view
Default Level
2: Configuration level
Usage Guidelines
After an ND trusted port is enabled in a Mesh profile and the Mesh profile is applied to an AP, the AP receives valid ND protocol packets and forwards the packets to STAs or peer APs so that the STAs can obtain valid IPv6
addresses and go online.
Example
# Enable an ND trusted port in the Mesh profile test.
<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] nd trust port