peer-ap mac (Mesh whitelist profile view)

Function

The peer-ap mac command adds MAC addresses of neighboring APs that are allowed to connect to an AP to a Mesh whitelist profile.

The undo peer-ap mac command deletes the MAC addresses of neighboring APs from a Mesh whitelist profile.

By default, no MAC address of a neighboring AP is added to a Mesh whitelist profile.

Format

peer-ap mac mac-address

undo peer-ap mac mac-address

Parameters

Parameter	Description	Value
mac-address	Specifies the MAC address of a neighboring AP to be added to a Mesh whitelist profile.	The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

Views

Mesh whitelist profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a Mesh whitelist profile is created, you can run the peer-ap mac command to add neighboring APs' MAC addresses to the profile.

If a Mesh whitelist profile is bound to a Mesh profile, only APs with MAC addresses in the Mesh whitelist profile can access the local AP, and other APs are denied access.

Precautions

A maximum of 64 MAC addresses can be added to a Mesh whitelist.

Example

# Create the Mesh whitelist profile whitelist and add the MAC address 0001-0001-0001 to the whitelist profile. Bind the Mesh whitelist profile whitelist to radio 0 of APs in the AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-whitelist-profile name whitelist
[HUAWEI-wlan-mesh-whitelist-whitelist] peer-ap mac 0001-0001-0001
[HUAWEI-wlan-mesh-whitelist-whitelist] quit
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] radio 0
[HUAWEI-wlan-group-radio-group1/0] mesh-whitelist-profile whitelist