ndp trunk-member enable

Function

The ndp trunk-member enable command enables trunk member interface-based NDP.

The undo ndp trunk-member enable command disables trunk member interface-based NDP.

By default, trunk member interface-based NDP is disabled.

Format

ndp trunk-member enable

undo ndp trunk-member enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If a local switch connects to a remote switch through a trunk link, the local switch discovers neighbors and displays NTDP topology information based on the trunk interface. To allow the local switch to obtain link information about trunk member interfaces, run the ndp trunk-member enable command to enable trunk member interface-based NDP. The topology information about the trunk member interfaces can then be queried on the NMS.

Prerequisites

NDP has been globally enabled using the ndp enable command.

Example

# Enable trunk member interface-based NDP.

<HUAWEI> system-view

[HUAWEI] ndp enable

[HUAWEI] ndp trunk-member enable