ntdp enable (interface view)

Function

The ntdp enable command enables NTDP on an interface.

The undo ntdp enable command disables NTDP on an interface.

The ntdp disable command disables NTDP on an interface.

By default, NTDP is enabled on an interface.

Format

ntdp enable

undo ntdp enable

ntdp disable

Parameters

None

Views

Ethernet interface view, GE interface view, XGE interface view, MultiGE interface view, 25GE interface view, 40GE interface view, 100GE interface view, port group view, Eth-Trunk interface view

Default Level

2: Configuration level

Usage Guidelines

Before you enable network topology collection, run the ntdp enable command to enable NTDP on an interface.

Example

# Disable NTDP in the GE0/0/1 interface view.

<HUAWEI> system-view

[HUAWEI] interface gigabitethernet 0/0/1

[HUAWEI-GigabitEthernet0/0/1] undo ntdp enable