nqa twamp-light

Function

The nqa twamp-light command creates the TWAMP Light service and displays the TWAMP-Light view. If the TWAMP-Light service already exists, the TWAMP-Light view is directly displayed.

The undo nqa twamp-light command deletes the TWAMP Light service.

By default, the TWAMP Light service is not configured.

Format

nqa twamp-light

undo nqa twamp-light

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Using a simple structure of TWAMP, TWAMP Light lowers the requirements on the Responder. TWAMP Light measures bidirectional network performance between any nodes on the network. When the TWAMP Light service is required, run the nqa twamp-light command to create the TWAMP Light service.

Precautions

After you run the undo nqa twamp-light command, the device automatically deletes all TWAMP Light roles, sessions, and measurement services.

Example

# Create the TWAMP Light service.

<HUAWEI> system-view
[HUAWEI] nqa twamp-light
[HUAWEI-twamp-light]