ntdp timer hop-delay

Function

The ntdp timer hop-delay command sets a delay after which the first interface forwards NTDP topology request packets.

The undo ntdp timer hop-delay command restores the default delay.

By default, the first interface forwards NTDP topology request packets after a delay of 200 milliseconds.

Format

ntdp timer hop-delay hop-delay-time

undo ntdp timer hop-delay

Parameters

Parameter	Description	Value
hop-delay-time	Specifies the delay after which the first interface forwards NTDP topology request packets.	The value is an integer that ranges from 1 to 1000, in milliseconds.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

To set a delay after which the first interface forwards NTDP topology request packets, run the ntdp timer hop-delay command. This command takes effect only after NTDP is enabled on the switch.

Example

# Set the hop delay for forwarding NTDP topology request packets to 300 milliseconds.

<HUAWEI> system-view

[HUAWEI] ntdp timer hop-delay 300