ntdp timer port-delay

Function

The ntdp timer port-delay command sets a delay after which interfaces other than the first one forwards NTDP topology request packets.

The undo ntdp timer port-delay command restores the default delay.

By default, interfaces other than the first one forward NTDP topology request packets after a delay of 20 milliseconds.

ntdp timer port-delay port-delay-time

undo ntdp timer port-delay

Parameter	Description	Value
port-delay-time	Specifies the delay after which interfaces other than the first one forward NTDP topology request packets.	The value is an integer that ranges from 1 to 1000, in milliseconds.

System view

2: Configuration level

The ntdp timer port-delay command takes effect only after NTDP is enabled on the switch.

# Set the delay for interfaces other than the first one on the device to forward NTDP topology request packets to 40 milliseconds.

<HUAWEI> system-view

[HUAWEI] ntdp timer port-delay 40