oam-bind ingress interface egress cfm md ma (upgrade-compatible command)

Function

The oam-bind ingress interface egress cfm md ma command configures an interface to report faults to Ethernet CFM.

Format

oam-bind ingress interface interface-type interface-number egress cfm md md-name ma ma-name

Parameters

Parameter	Description	Value
interface-type interface-number	Specifies the type and number of an interface. interface-type specifies the interface type. interface-number specifies the interface number.	-
md md-name	Specifies the name of an MD.	The value is a string of 1 to 43 case-sensitive characters without spaces, hyphen (-), and question mark (?).
ma ma-name	Specifies the name of an MA.	The value is a string of 1 to 43 case-sensitive characters without spaces, hyphen (-), and question mark (?). The total length of the names of the MA and MD must be within 44 characters.

Parameter

Description

Value

interface-type interface-number

Specifies the type and number of an interface.

interface-type specifies the interface type.
interface-number specifies the interface number.

md md-name

Specifies the name of an MD.

The value is a string of 1 to 43 case-sensitive characters without spaces, hyphen (-), and question mark (?).

ma ma-name

Specifies the name of an MA.

The value is a string of 1 to 43 case-sensitive characters without spaces, hyphen (-), and question mark (?). The total length of the names of the MA and MD must be within 44 characters.

Views

OAM management view

Default Level

2: Configuration level

Usage Guidelines

This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.

After an upgrade, it is replaced by the oam-bind ingress interface interface-type interface-number egress cfm md md-name ma ma-name trigger if-down command.