oam-bind ingress interface egress efm interface (upgrade-compatible command)

Function

The oam-bind ingress interface egress efm interface command enables an interface to report faults to EFM OAM.

Format

oam-bind ingress interface interface-type1 interface-number1 egress efm interface interface-type2 interface-number2

Parameters

Parameter	Description	Value
interface-type1 interface-number1	Specifies the type and number of the interface enabled with EFM. interface-type1 specifies the interface type. interface-number1 specifies the interface number.	-
interface-type2 interface-number2	Specifies the type and number of the interface bound to an EFM OAM session. interface-type2 specifies the interface type. interface-number2 specifies the interface number.	-

Parameter

Description

Value

interface-type1 interface-number1

Specifies the type and number of the interface enabled with EFM.

interface-type1 specifies the interface type.
interface-number1 specifies the interface number.

interface-type2 interface-number2

Specifies the type and number of the interface bound to an EFM OAM session.

interface-type2 specifies the interface type.
interface-number2 specifies the interface number.

Views

OAM management view

Default Level

2: Configuration level

Usage Guidelines

This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.

After an upgrade, it is replaced by the oam-bind ingress interface interface-type1 interface-number1 egress efm interface interface-type2 interface-number2 trigger if-down command.