plmn-id

Function

The plmn-id command configures the Public Land Mobile Network (PLMN) identifier.

The undo plmn-id command deletes the PLMN identifier.

By default, no PLMN identifier is configured in the cellular network profile.

Format

plmn-id plmn-id

undo plmn-id plmn-id

Parameters

Parameter	Description	Value
plmn-id	Indicates the PLMN identifier.	The value is an integer that ranges from 10000 to 999999.

Views

Cellular network profile view

Default Level

2: Configuration level

Usage Guidelines

After the plmn-id command is executed, the AP notifies STAs of the operator information on the Hotspot2.0 network. The STAs can obtain the PLMN identifier to determine whether to select the cellular network according to the Hotspot2.0 network.

If you run the plmn-id multiple times, multiple PLMN identifiers are configured. A maximum of 32 PLMN identifiers can be configured.

Example

# Set the PLMN identifier to 10001.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] cellular-network-profile name cellular-network-profile1
[HUAWEI-wlan-cellular-net-cellular-network-profile1] plmn-id 10001