The roaming-consortium-oi command configures the roaming consortium identifier of the Hotspot2.0 network.
The undo roaming-consortium-oi command deletes the roaming consortium identifier of the Hotspot2.0 network.
By default, no roaming consortium identifier is configured for the Hotspot2.0 network.
Parameter |
Description |
Value |
|---|---|---|
oi-value |
Indicates the roaming consortium identifier, which is used to identify operators. |
The format is HH-HH-HH or HH-HH-HH-HH-HH, in which H is in the hexadecimal format. |
in-beacon |
Indicates that the Beacon and probe-response frames sent by the AP contain the roaming consortium identifier. |
- |
Usage Scenario
If STAs may roam between the Hotspot2.0 network and a network of another operator, you can configure the OI of the operator that provides the roaming service so that STAs can select networks.
Precautions
If you run this command multiple times, multiple OIs are configured. A maximum of 32 OIs can be configured in a roaming consortium profile. To configure OIs in the roaming consortium profile, the first OI must carry the in-beacon parameter. A maximum of three OIs can be configured to carry the in-beacon parameter.
# Add an OI 00-11-22 to the profile roaming-consortium-profile1 and add the OI to the Beacon and probe-response frames sent by the AP.
<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] roaming-consortium-profile name roaming-consortium-profile1
[HUAWEI-wlan-ro-co-prof-roaming-consortium-profile1] roaming-consortium-oi 00-11-22 in-beacon