poe disable (AP wired port link profile view)

Function

The poe disable command disables the PoE function on an AP's wired interface.

The undo poe disable command enables the PoE function on an AP's wired interface.

By default, the PoE function is enabled on an AP's interface.

Format

poe disable

undo poe disable

Parameters

None

Views

AP wired port link profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenarios

Before using an AP to provide power for PDs connected to its interfaces, ensure that the PoE function is enabled on the interfaces. To enable the PoE function on an interface, run the undo poe disable command.

The power-on and power-off of interfaces are determined by the PoE power and interface power priority. When the PoE power is sufficient, the device does not power off one interface. To stop providing power for one PD, run the poe disable command.

Precautions

The AP only supports PoE power supply on downlink interfaces and does not support PoE power supply on uplink interfaces.

This function is supported only by the AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP8082DN, AP8182DN, AP2050DN-E, AP2051DN-E, R250D-E, R251D-E, AD9431DN-24X, AD9430DN-24, AD9430DN-12.

Example

# Disable the PoE function on an AP's wired interface.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] port-link-profile name port-link1
[HUAWEI-wlan-port-link-prof-port-link1] poe disable