poe force-power (AP wired port link profile view)

Function

The poe force-power command enables forcible PoE power supply on an interface.

The undo poe force-power command disables forcible PoE power supply on an interface.

By default, forcible PoE power supply is disabled on an interface.

Format

poe force-power

undo poe force-power

Parameters

None

Views

AP wired port link profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After this function is configured, an interface forcibly powers on the connected PD even if the PSE cannot identify the PD. Before powering on the interface, ensure that the system power is sufficient.

Precautions

If a PoE interface connects to a non-PoE device, do not use this command.

This function is supported only by the AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP8082DN, AP8182DN, AP2050DN-E, AP2051DN-E, R250D-E, R251D-E, AD9431DN-24X, AD9430DN-24, AD9430DN-12.

Example

# Enable forcible PoE power supply on an AP's interface.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] port-link-profile name port-link1
[HUAWEI-wlan-port-link-prof-port-link1] poe force-power