poe high-inrush enable (AP system profile view)

Function

The poe high-inrush enable command configures an interface to allow high inrush current during power-on.

The undo poe high-inrush enable command disables an interface from allowing high inrush current during power-on.

By default, interfaces do not allow high inrush current during power-on.

Format

poe high-inrush enable

undo poe high-inrush enable

Parameters

None

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

High inrush current is generated when a non-standard PD is powered on. In this case, the PSE cuts off the power of the PD to protect itself. If the PSE is required to provide power for the PD, the PSE must allow high inrush current.

Precautions

The high inrush current may damage components of a PD.

This function is supported only by the AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP8082DN, AP8182DN, AP2050DN-E, AP2051DN-E, R250D-E, R251D-E, AD9431DN-24X, AD9430DN-24, and AD9430DN-12.

Example

# Enable the AP to allow high inrush current during power-on.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name apsys1
[HUAWEI-wlan-ap-system-prof-apsys1] poe high-inrush enable