poe power-threshold
Function
The poe power-threshold command sets the alarm threshold of the PoE power consumption percentage.
The undo poe power-threshold command restores the default alarm threshold of the PoE power consumption percentage.
By default, the alarm threshold is 90%. That is, an alarm is generated when the consumed power accounts for 90% of the total power.
Format
poe power-threshold threshold-value [ slot slot-id [ mcu mcu-id ] ]
undo poe power-threshold threshold-value slot slot-id
undo poe power-threshold [ slot slot-id [ mcu mcu-id ] ]
Only the S5720I-28X-PWH-SI-AC supports the mcu mcu-id parameter.
Parameters
Parameter |
Description |
Value |
|---|---|---|
threshold-value |
Specifies the alarm threshold of the PoE power consumption percentage. When the power consumption reaches this value, a PoE power alarm is generated. |
The value is an integer that ranges from 0 to 100, in percentage. The default value is 90. |
slot slot-id |
Specifies a slot ID. |
The value depends on the device configuration. |
mcu mcu-id |
MCU ID |
The value is an integer ranging from 1 to 2. |
Usage Guidelines
The poe power-threshold command sets the alarm threshold of the PoE power consumption percentage. If the total PoE power is 369.6 W and the alarm threshold is 90%, an alarm is generated when the power consumption is greater than 332.64 W. When the power consumption falls below 332.64 W, the alarm is cleared.