poe priority

Function

The poe priority command sets the power priority of a PoE interface.

The undo poe priority command restores the default power priority of a PoE interface.

By default, the power supply priority of an interface is low.

Format

poe priority { critical | high | low }

undo poe priority

Parameters

Parameter	Description	Value
critical	Indicates the highest priority.	-
high	Indicates the second highest priority.	-
low	Indicates the lowest priority.	-

Views

Interface view, port group view

Default Level

2: Configuration level

Usage Guidelines

When the output power of a device is insufficient, the device in automatic power management mode provides power for the interfaces of the higher power supply priorities first and cuts off power of the interfaces of the lower power supply priorities. the S5720-EI and S5720-HI support power to PDs connected to the interfaces in ascending order of interface numbers. Other series of PoE switches provide power to PDs connected to the interfaces in the sequence in which PDs are connected to them.

Example

# Set the power supply priority of GigabitEthernet0/0/1 to critical.

<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] poe priority critical