poe power-threshold (AP system profile view)

Function

The poe power-threshold command sets the alarm threshold of the PoE power consumption percentage.

The undo poe power-threshold command restores the default alarm threshold of the PoE power consumption percentage.

By default, the alarm threshold is 100%.

Format

poe power-threshold threshold-value

undo poe power-threshold

Parameters

Parameter	Description	Value
threshold-value	Specifies the alarm threshold of the PoE power consumption percentage. When the power consumption reaches this value, a PoE power alarm is generated.	The value is an integer that ranges from 0 to 100, in percentage.

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The poe power-threshold command sets the alarm threshold of the PoE power consumption percentage. If the total PoE power is 380 W and the alarm threshold is 90%, an alarm is generated when the power consumption is greater than 342 W. When the power consumption falls below 342 W, the alarm is cleared.

Precautions

This function is supported only by the AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP8082DN, AP8182DN, AP2050DN-E, AP2051DN-E, R250D-E, R251D-E, AD9431DN-24X, AD9430DN-24, AD9430DN-12.

Example

# Set the alarm threshold of the PoE power consumption percentage to 80%.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name apsys1
[HUAWEI-wlan-ap-system-prof-apsys1] poe power-threshold 80