poe priority (AP wired port link profile view)

Function

The poe priority command sets the power priority of a PoE interface.

The undo poe priority command restores the default power priority of a PoE interface.

By default, the power supply priority of an interface is low.

Format

poe priority { critical | high | low }

undo poe priority

Parameters

Parameter	Description	Value
critical	Indicates the highest priority.	-
high	Indicates the second highest priority.	-
low	Indicates the lowest priority.	-

Views

AP wired port link profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When the output power of a device is insufficient, the device provides power for the interfaces of the higher power supply priorities first and cuts off power of the interfaces of the lower power supply priorities. If all the interfaces are of the same priority, the power supply priority of the interface with a smaller interface number is higher.

Precautions

This function is supported only by the AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP8082DN, AP8182DN, AP2050DN-E, AP2051DN-E, R250D-E, R251D-E, AD9431DN-24X, AD9430DN-24, AD9430DN-12.

Example

# Set the power priority of an AP's interface to Critical.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] port-link-profile name port-link1
[HUAWEI-wlan-port-link-prof-port-link1] poe priority critical