qbss-load enable

Function

The qbss-load enable command enables the function of notifying STAs of the AP load status.

The undo qbss-load enable command disables the function of notifying STAs of the AP load status.

By default, the function of notifying STA of the AP load is disabled.

Format

qbss-load enable

undo qbss-load enable

Parameters

None

Views

SSID profile view

Default Level

2: Configuration level

Usage Guidelines

After the qbss-load enable command is executed, APs notify STAs of the AP load status during the STA association. The notified information includes the number of STAs associated with the ratio and channel utilization. STAs choose to associate with the optimal AP based on the AP status, improving air interface performance.

This command takes effect only when the dynamic load balancing function is disabled. If the dynamic load balancing function is enabled, the AP notifies the STA of the load status.

Example

# Enable the function of notifying STAs of the AP load status in the SSID profile ssid1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ssid-profile name ssid1
[HUAWEI-wlan-ssid-prof-ssid1] qbss-load enable