radio

Function

The radio command displays the radio view.

Format

radio radio-id

Parameters

Parameter	Description	Value
radio-id	Specifies the radio ID.	The radio ID must exist.

Views

AP group view, AP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The radio configuration in the AP group view or AP view takes effect on all radios at the same time. To configure only a specified radio, enter the view of the radio to configure its parameters.

Precautions

If you run this command in the AP group view, configurations on all specified radios in the AP group are allowed. If you run this command in the AP view, configurations only on the specified radio on the AP are allowed.

Example

# Display the view of radio 0 on AP 0.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-id 0
[HUAWEI-wlan-ap-0] radio 0
[HUAWEI-wlan-radio-0/0]