qos map-table

Function

The qos map-table command displays the DSCP mapping table view.

Only the S2720-EI, S5720I-SI, S5720-LI, S5720S-LI, S5720S-SI, S5720-SI, S5730S-EI, S5730-SI, S6720-LI, S6720S-LI, S6720S-SI, and S6720-SI support this command.

Format

qos map-table { dscp-dot1p | dscp-dp | dscp-dscp }

Parameters

Parameter	Description	Value
dscp-dot1p	Displays the dscp-dot1p view. The dscp-dot1p table contains the mapping between DSCP priorities and 802.1p priorities.	-
dscp-dp	Displays the dscp-dp view. The dscp-dp table contains the mapping between DSCP priorities and drop precedences.	-
dscp-dscp	Displays the dscp-dscp view. The dscp-dscp table contains the mapping between DSCP priorities and DSCP priorities.	-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Before mapping received packets based on the DSCP priority, run the qos map-table command to enter the priority mapping table view.

Follow-up Procedure

Run the input (DSCP priority mapping table view) command to configure the mapping.

Example

# Enter the dscp-dot1p view.

<HUAWEI> system-view
[HUAWEI] qos map-table dscp-dot1p
[HUAWEI-dscp-dot1p]