qos schedule-profile (interface view)

Function

The qos schedule-profile command applies a global scheduling profile to an interface.

The undo qos schedule-profile command deletes a global scheduling profile from an interface.

By default, no global scheduling profile is applied to an interface.

Only the S2720-EI, S5720I-SI, S5720-LI, S5720S-LI, S5720S-SI, S5720-SI, S5730S-EI, S5730-SI, S6720-LI, S6720S-LI, S6720S-SI, and S6720-SI support this command.

Format

qos schedule-profile profile-name

undo qos schedule-profile

Parameters

Parameter	Description	Value
profile-name	Specifies the name of a scheduling profile.	The value must be the name of an existing scheduling profile.

Views

Ethernet interface view, MultiGE interface view, GE interface view, XGE interface view, 40GE interface view, port group view

Default Level

2: Configuration level

Usage Guidelines

After running the qos schedule-profile (system view) command to create a global scheduling profile, you can run the qos schedule-profile command in the interface view to apply the global scheduling profile to an interface to perform queue scheduling.

Example

# Create a global scheduling profile named test, set the queue scheduling mode to PQ, and then apply the global scheduling profile to GE0/0/1.

<HUAWEI> system-view
[HUAWEI] qos schedule-profile test
[HUAWEI-qos-schedule-profile-test] qos pq
[HUAWEI-qos-schedule-profile-test] quit
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] qos schedule-profile test