qos schedule-profile (system view)

Function

The qos schedule-profile command creates a global scheduling profile and displays the scheduling profile view.

The undo qos schedule-profile command deletes a created global scheduling profile.

By default, no global scheduling profile is created.

Only the S2720-EI, S5720I-SI, S5720-LI, S5720S-LI, S5720S-SI, S5720-SI, S5730S-EI, S5730-SI, S6720-LI, S6720S-LI, S6720S-SI, and S6720-SI support this command.

Format

qos schedule-profile profile-name

undo qos schedule-profile profile-name

Parameters

Parameter	Description	Value
profile-name	Specifies the name of a scheduling profile.	The value is a string of 1 to 31 case-insensitive characters without spaces. NOTE: A maximum of six scheduling profiles are allowed; otherwise, the system displays an error message.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

After running the qos schedule-profile command in the system view to create a global scheduling profile, you can run the qos { pq | wrr | drr } command in the scheduling profile view to configure a queue scheduling mode. You can apply a global scheduling profile to a physical interface to perform queue scheduling.

Example

# Create a global scheduling profile named test.

<HUAWEI> system-view
[HUAWEI] qos schedule-profile test
[HUAWEI-qos-schedule-profile-test]