The radio-5g-profile command binds a 5G radio profile to a 5G radio.
The undo radio-5g-profile command unbinds a 5G radio profile from a 5G radio.
By default, no 5G radio profile is applied in the AP view and AP radio view, but the 5G radio profile default is applied to the AP group view and AP group radio view.
radio-5g-profile profile-name radio { id | all }
undo radio-5g-profile radio { id | all }
radio { id | all } is supported only in the AP group view and AP view.
Parameter |
Description |
Value |
|---|---|---|
profile-name |
Specifies the name of a 5G radio profile. |
The 5G radio profile must exist. |
radio id |
Specifies the radio ID. |
The value is an integer that ranges from 0 to 2. Three radios are available only on the AirEngine 8760-X1-PRO, AirEngine 8760R-X1E, AirEngine 6760-X1, AirEngine 6760-X1E, AirEngine 5760-51, AP4030TN, AP4051TN, AP8050TN-HD. |
radio all |
Specifies all radios. |
- |
Usage Scenario
After you create a 5G radio profile using the radio-5g-profile (WLAN view) command, bind it to a 5G radio so that the 5G radio profile can take effect.
Precautions
After a 5G radio profile is applied in the AP group view or AP view, the parameter settings in the profile take effect on all 5G radios in the AP group or the 5G radio of the AP.
The configuration in the AP view and AP radio view has a higher priority than that in the AP group view and AP group radio view.
# Create the 5G radio profile radio-profile2 and bind it to AP group group1.
<HUAWEI> system-view [HUAWEI] wlan [HUAWEI-wlan-view] radio-5g-profile name radio-profile2 [HUAWEI-wlan-radio-2g-prof-radio-profile2] quit [HUAWEI-wlan-view] ap-group name group1 [HUAWEI-wlan-ap-group-group1] radio-5g-profile radio-profile2 radio 1