radio disable

Function

(AP group radio view) The radio disable command disables all specified radios in an AP group.

(AP group radio view) The undo radio disable command enables all specified radios in an AP group.

(AP radio view) The radio disable command disables an AP radio.

(AP radio view) The undo radio disable command restores the configuration of a specified radio in an AP to the configuration in the AP group radio view.

By default, all AP radios are enabled.

Format

radio disable

undo radio disable

Parameters

None

Views

AP radio view, AP group radio view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run this command to enable or disable a specified radio.

If radio calibration is enabled on the AP, coverage hole filling will be triggered after the radio is disabled for 5 minutes, to fill coverage holes left by the disabled radio.

Example

# Disable radio 0 of AP 1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-id 1
[HUAWEI-wlan-ap-1] radio 0
[HUAWEI-wlan-radio-1/0] radio disable
Warning: This action may cause service interruption. Continue?[Y/N]y