radius-server framed-ip-address no-user-ip enable

Function

The radius-server framed-ip-address no-user-ip enable command enables the device to encapsulate the RADIUS attribute Framed-IP-Address into a RADIUS authentication request packet when the RADIUS authentication request packet sent by a user does not carry the user IP address.

The undo radius-server framed-ip-address no-user-ip enable command disables the device from encapsulating the RADIUS attribute Framed-IP-Address into a RADIUS authentication request packet when the RADIUS authentication request packet sent by a user does not carry the user IP address.

By default, the device does not encapsulate the RADIUS attribute Framed-IP-Address into a RADIUS authentication request packet when the RADIUS authentication request packet sent by a user does not carry the user IP address.

Format

radius-server framed-ip-address no-user-ip enable

undo radius-server framed-ip-address no-user-ip enable

Parameters

None

Views

RADIUS server template view

Default Level

3: Management level

Usage Guidelines

In MAC address authentication triggered through DHCP packets, a user can obtain an IP address only after being successfully authenticated. The RADIUS authentication request packet sent by the user does not carry the IP address of the user. By default, the device does not encapsulate the RADIUS attribute Framed-IP-Address into the RADIUS authentication request packet sent by the user when forwarding the packet. If the RADIUS server connected to the device requires that the received RADIUS authentication request packets contain the RADIUS attribute Framed-IP-Address, run the radius-server framed-ip-address no-user-ip enable command. Then the device uses the IP address 0.0.0.0 to encapsulate the RADIUS attribute Framed-IP-Address when receiving the RADIUS authentication request packets that do not contain the user IP address.

Example

# Enable the device to encapsulate the RADIUS attribute Framed-IP-Address into a RADIUS authentication request packet when the RADIUS authentication request packet sent by a user does not carry the user IP address.

<HUAWEI> system-view
[HUAWEI] radius-server template template1
[HUAWEI-radius-template1] radius-server framed-ip-address no-user-ip enable