radius-server hw-ap-info-format include-ap-ip

Function

The radius-server hw-ap-info-format include-ap-ip command configures the AP's IP address carried in Huawei extended attribute HW-AP-Information.

The undo radius-server hw-ap-info-format command restores the default setting.

By default, Huawei extended attribute HW-AP-Information does not carry AP's IP address.

This function is supported only by S5730-HI, S5731-H, S5731S-H, S6730-H, S6730S-H, S5732-H, S6720-HI, and S5720-HI.

Format

radius-server hw-ap-info-format include-ap-ip

undo radius-server hw-ap-info-format

Parameters

None

Views

RADIUS server template view

Default Level

3: Management level

Usage Guidelines

RADIUS is a fully extensible protocol. Device vendors can expand the No. 26 attribute defined in the protocol to implement functions not supported by standard RADIUS attributes. Huawei defines the No. 141 sub-attribute (HW-AP-Information) in the No. 26 attribute to indicate AP information, including the MAC and IP addresses of an AP. The HW-AP-Information attribute is carried in the authentication or accounting request packet send by a device, so that the RADIUS server can use the AP's MAC and IP addresses as the filter criterion to select a policy template to be delivered.

When an AP's IP address is carried in the HW-AP-Information attribute, the encapsulation format of the attribute is AP-MAC AP-IP.

Example

#Configure the AP's IP address in Huawei extended attribute HW-AP-Information.

<HUAWEI> system-view
[HUAWEI] radius-server template huawei
[HUAWEI-radius-huawei] radius-server hw-ap-info-format include-ap-ip