rate-limit client dynamic

Function

The rate-limit client dynamic command sets the dynamic rate limit threshold for a single STA in a VAP.

The undo rate-limit client dynamic command restores the default dynamic rate limit threshold of a single STA in a VAP.

By default, the dynamic rate limit threshold of a single STA in a VAP is 16 Mbit/s.

Format

rate-limit client dynamic rate-value

undo rate-limit client dynamic

Parameters

Parameter	Description	Value
rate-value	Specifies the rate limit of packets.	The value is an enumerated value, which can be 8, 16, or 32, in Mbit/s. The default value is 16 Mbit/s.

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a STA downloads or uploads large files on the live network, network access of other STAs may be affected.

After dynamic rate limiting is enabled, the device determines whether to perform three-phase rate limiting for wireless users depending on whether the air interface is congested. This improves network experience of wireless users.

Precautions

If static rate limiting has been enabled, static rate limiting takes precedence over dynamic rate limiting.

Example

# Set the dynamic rate limit threshold for a single STA in a VAP.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1 
[HUAWEI-wlan-traffic-prof-p1] undo rate-limit client dynamic disable
[HUAWEI-wlan-traffic-prof-p1] rate-limit client dynamic 32