rate-limit client dynamic disable

Function

The rate-limit client dynamic disable command disables dynamic rate limiting for a single STA in a VAP.

The undo rate-limit client dynamic disable command enables dynamic rate limiting for a single STA in a VAP.

By default, dynamic rate limiting is enabled for a single STA in a VAP.

Format

rate-limit client dynamic disable

undo rate-limit client dynamic disable

Parameters

None

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a STA downloads or uploads large files on the live network, network access of other STAs may be affected.

After dynamic rate limiting is enabled, the device determines whether to perform three-phase rate limiting for wireless users depending on whether the air interface is congested. This improves network experience of wireless users.

Precautions

If static rate limiting has been enabled, static rate limiting takes precedence over dynamic rate limiting.

Example

# Enable dynamic rate limiting for a single STA in a VAP.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1 
[HUAWEI-wlan-traffic-prof-p1] undo rate-limit client dynamic disable