| Parameter | Description | Value |
|---|---|---|
| slot slot-id | Specifies the slot ID of a switch that needs to update IPv4 FIB policies. | The value is determined based on the device configuration. |
Usage Scenario
After the IPv4 FIB policy changes, you must run the refresh fib command to update the switch to make the configuration take effect.
After the refresh fib command is executed, you can view the FIB table to check whether the update succeeds.
Precautions
If the FIB module is in overload state and the switch works in overload suspension mode, the IPv4 and IPv6 modules need to be updated.