refresh ipv6 fib
Parameters
| Parameter | Description | Value |
|---|---|---|
| slot slot-id | Specifies the slot ID of a switch that needs to update IPv6 FIB policies. | The value is determined based on the device configuration. |
Usage Guidelines
After the IPv6 FIB policy changes, you must run the refresh ipv6 fib command to update the switch to make the configuration take effect.
After the refresh ipv6 fib command is executed, you can view the FIB table to check whether the update succeeds.
If the FIB module is in overload state and the switch works in overload suspension mode, the IPv4 and IPv6 modules need to be updated.