remote-mep ccm-receive enable

Function

The remote-mep ccm-receive enable command enables a MEP on the device to receive CCMs from an RMEP in the same MA or MAC tunnel.

The undo remote-mep ccm-receive enable command cancels the configuration.

By default, a MEP does not receive CCMs from an RMEP.

Format

remote-mep ccm-receive [ mep-id mep-id ] enable

undo remote-mep ccm-receive [ mep-id mep-id ] enable

Parameters

Parameter	Description	Value
mep-id mep-id	Enables a MEP to receive CCMs from the specified RMEP. If this parameter is not specified, a MEP can receive CCMs from all RMEPs in the same MA.	The value is an integer that ranges from 1 to 8191.

Views

MA view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The remote-mep ccm-receive enable command enables a MEP on the device to receive CCMs from an RMEP in the same MA or MAC tunnel.

Precautions

The interval at which CCMs are sent or detected cannot be changed on the device in an MA if one of the following operations is performed:

The device is enabled to send CCMs using the mep ccm-send enable command.
The device is enabled to receive CCMs using the remote-mep ccm-receive enable command.

The undo mep ccm-send enable or undo remote mep ccm-receive enable command must be run before the interval is reconfigured.

Prerequisites

A MEP and an RMEP have been created in the MA.

Example

# Enable the device to receive CCMs from RMEP 10 in ma1.

<HUAWEI> system-view
[HUAWEI] cfm enable
[HUAWEI] cfm md md1
[HUAWEI-md-md1] ma ma1
[HUAWEI-md-md1-ma-ma1] remote-mep mep-id 10 mac 0001-0300-0204
[HUAWEI-md-md1-ma-ma1] remote-mep ccm-receive mep-id 10 enable