reset l2protocol-tunnel statistics

Function

The reset l2protocol-tunnel statistics command clears statistics about Layer 2 protocol packets that are transparently transmitted on an interface.

Format

reset l2protocol-tunnel statistics interface-type interface-number [ { protocol-type } &<1-16> | user-defined-protocol protocol-name ]

Parameters

Parameter	Description	Value
interface-type interface-number	Clears statistics about Layer 2 protocol packets that are transparently transmitted on a specified interface. interface-type specifies the type of an interface. interface-number specifies the number of an interface. The specified interface must be enabled with Layer 2 protocol tunneling.	-
protocol-type	Clears statistics about transparently transmitted packets of a specified protocol.	The protocol type can be: Spanning Tree Protocol (STP) Link Aggregation Control Protocol (LACP) Ethernet Operation, Administration, and Maintenance 802.3ah (EOAM3ah) Link Layer Discovery Protocol (LLDP) GARP VLAN Registration Protocol (GVRP) GARP Multicast Registration Protocol (GMRP) HUAWEI Group Management Protocol (HGMP) VLAN Trunking Protocol (VTP) Unidirectional Link Detection (UDLD) Port Aggregation Protocol (PAGP) Cisco Discovery Protocol (CDP) Per VLAN Spanning Tree Plus (PVST+) Shared Spanning Tree Protocol (SSTP) Dynamic Trunking Protocol (DTP) Device Link Detection Protocol (DLDP) Ethernet Synchronization Message Channel (ESMC) You can select one or more Layer 2 protocols.
user-defined-protocol protocol-name	Clears statistics about transparently transmitted packets of a user-defined protocol. protocol-name specifies the name of a user-defined protocol.	The value is a string of 1 to 31 case-sensitive characters without spaces. When double quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

interface-type interface-number

Clears statistics about Layer 2 protocol packets that are transparently transmitted on a specified interface.

interface-type specifies the type of an interface.
interface-number specifies the number of an interface.

The specified interface must be enabled with Layer 2 protocol tunneling.

protocol-type

Clears statistics about transparently transmitted packets of a specified protocol.

The protocol type can be:

Spanning Tree Protocol (STP)
Link Aggregation Control Protocol (LACP)
Ethernet Operation, Administration, and Maintenance 802.3ah (EOAM3ah)
Link Layer Discovery Protocol (LLDP)
GARP VLAN Registration Protocol (GVRP)
GARP Multicast Registration Protocol (GMRP)
HUAWEI Group Management Protocol (HGMP)
VLAN Trunking Protocol (VTP)
Unidirectional Link Detection (UDLD)
Port Aggregation Protocol (PAGP)
Cisco Discovery Protocol (CDP)
Per VLAN Spanning Tree Plus (PVST+)
Shared Spanning Tree Protocol (SSTP)
Dynamic Trunking Protocol (DTP)
Device Link Detection Protocol (DLDP)
Ethernet Synchronization Message Channel (ESMC)

You can select one or more Layer 2 protocols.

user-defined-protocol protocol-name

Clears statistics about transparently transmitted packets of a user-defined protocol. protocol-name specifies the name of a user-defined protocol.

The value is a string of 1 to 31 case-sensitive characters without spaces.

When double quotation marks are used around the string, spaces are allowed in the string.

Views

User view

Default Level

3: Management level

Usage Guidelines

To collect statistics about Layer 2 protocol packets transparently transmitted on an interface in a specified period, you must reset original statistics on the interface.

When using the reset l2protocol-tunnel statistics command, pay attention to the following points:

If you specify an interface but do not specify any protocol, statistics about all Layer 2 protocol packets on the interface are reset.
If you specify an interface and a protocol, statistics about packets of the specified protocol are reset.

Statistics about Layer 2 protocol packets cannot be restored after being deleted. Confirm your action before you use this command.

Example

# Reset statistics about all Layer 2 protocol packets on GE0/0/1.

<HUAWEI> reset l2protocol-tunnel statistics gigabitethernet 0/0/1

# Reset statistics about STP packets on GE0/0/2.

<HUAWEI> reset l2protocol-tunnel statistics gigabitethernet 0/0/2 stp