reset l2protocol-tunnel statistics group-mac

Function

The reset l2protocol-tunnel statistics group-mac command clears statistics about transparently transmitted Layer 2 PDUs whose multicast destination MAC addresses are replaced with destination MAC addresses (group MAC address) on an interface.

Format

reset l2protocol-tunnel statistics group-mac [ interface-type interface-number ]

Parameters

Parameter	Description	Value
interface-type interface-number	Specifies the interface on which the statistics about transparently transmitted Layer 2 PDUs whose multicast destination MAC addresses are replaced with a specified group MAC address are to be cleared. interface-type specifies the type of the interface. interface-number specifies the number of the interface.	-

Parameter

Description

Value

interface-type interface-number

Specifies the interface on which the statistics about transparently transmitted Layer 2 PDUs whose multicast destination MAC addresses are replaced with a specified group MAC address are to be cleared.

interface-type specifies the type of the interface.
interface-number specifies the number of the interface.

Views

User view

Default Level

3: Management level

Usage Guidelines

After Layer 2 protocol tunneling is configured on a device, if you need to collect statistics within a specified period about transparently transmitted Layer 2 PDUs whose multicast destination MAC addresses are replaced with a specified group MAC address on an interface, first run the reset l2protocol-tunnel statistics group-mac command to clear existing statistics on the interface, and then enable the interface to collect statistics within that period.

Example

# Clear statistics about transparently transmitted Layer 2 PDUs whose multicast destination MAC addresses are replaced with a specified group MAC address on GE 0/0/1.

<HUAWEI> reset l2protocol-tunnel statistics group-mac Gigabitethernet 0/0/1