reset wlan non-wifi-device

Function

The reset wlan non-wifi-device command clears information about detected non-Wi-Fi devices.

Format

reset wlan non-wifi-device { all | { ap-name ap-name | ap-id ap-id } radio radio-id }

Parameters

Parameter	Description	Value
all	Clears information about the non-Wi-Fi devices detected by all APs.	-
ap-name ap-name	Clears information about the non-Wi-Fi devices detected by a specified AP name.	The AP name must already exist.
ap-id ap-id	Clears information about the non-Wi-Fi devices detected by a specified AP ID.	The AP ID must already exist.
radio radio-id	Clears information about the non-Wi-Fi devices detected by a specified AP radio.	The value is an integer that ranges from 0 to 2. Three radios are available only on the AirEngine 8760-X1-PRO, AirEngine 8760R-X1E, AirEngine 6760-X1, AirEngine 6760-X1E, AirEngine 5760-51, AP4030TN, AP4051TN, AP8050TN-HD.

Views

All views

Default Level

3: Management level

Usage Guidelines

Usage Scenario

Before recollecting information about detected non-Wi-Fi devices in a period, you can run the reset command to clear existing information so that the AC can recollect information.

Prerequisites

The spectrum analysis function has been enabled on a radio.

Impact

The cleared non-Wi-Fi device information cannot be restored. Exercise caution when you use the reset command. After the command is run, you can run the display wlan non-wifi-device history command to view related information.

Example

# Clear information about the non-Wi-Fi devices detected by all APs.

<HUAWEI> reset wlan non-wifi-device all