spectrum-report

Function

The spectrum-report command enables the function of reporting spectrum data on an AP radio.

The undo spectrum-report command disables the function of reporting spectrum data on an AP radio.

By default, the function of reporting spectrum data is disabled on an AP radio.

Format

spectrum-report { ap-name ap-name | ap-id ap-id } radio radio-id

undo spectrum-report { { ap-name ap-name | ap-id ap-id } [ radio radio-id ] | all }

Parameters

Parameter	Description	Value
ap-name ap-name	Specifies an AP name. The AP name and radio ID identify a radio.	The AP name must already exist.
ap-id ap-id	Specifies an AP ID. The AP ID and radio ID identify a radio.	The AP ID must already exist.
radio radio-id	Specifies a radio ID.	The value is an integer that ranges from 0 to 2. Three radios are available only on the AirEngine 8760-X1-PRO, AirEngine 8760R-X1E, AirEngine 6760-X1, AirEngine 6760-X1E, AirEngine 5760-51, AP4030TN, AP4051TN, AP8050TN-HD.
all	Specifies all APs.	-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the function of reporting spectrum data is enabled on an AP radio, the AP encapsulates collected data into UDP packets and sends the packets to the spectrum server. After receiving the data, the spectrum server analyzes the data and then displays radio information of non-Wi-Fi devices to users through images or tables.

Prerequisites

The spectrum analysis function has been enabled on a radio using the spectrum-analysis enable command.

Follow-up Procedure

Run the spectrum-analysis server command in the spectrum profile view to specify the IP address and port number of the spectrum server.

Precautions

The spectrum-report command becomes invalid after a restart and needs to be configured again.

Example

# Enable the function of reporting spectrum data on radio 0 of AP ap-huawei.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] spectrum-report ap-name ap-huawei radio 0