rtp-media monitor-period

Function

The rtp-media monitor-period command sets the monitoring period of media streams.

The undo rtp-media monitor-period command restores the default monitoring period of media streams.

By default, the monitoring period of media streams is 10 seconds.

Format

rtp-media monitor-period period-value

undo rtp-media monitor-period [ period-value ]

Parameters

Parameter	Description	Value
period-value	Specifies the monitoring period of media streams.	The value is of the enumerated type, and can only be 10, 30, and 60, in seconds.

Views

SEA view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To monitor service quality of voice and video applications transported over RTP, run the sea command to enable the SEA function to detect SIP sessions, and use the eMDI function to detect dynamic indicators of RTP streams. To adjust the monitoring period of media streams, run the rtp-media monitor-period command.

Precautions

Intelligent O&M for audio and video services takes effect only for unencrypted SIP packets without any tunnel header in IPv4 scenarios.

Example

# Set the monitoring period of media streams to 30 seconds.

<HUAWEI> system-view
[HUAWEI] sea
[HUAWEI-sea] rtp-media monitor-period 30