rtp-media monitor-type

Function

The rtp-media monitor-type command sets the type of media streams to be monitored.

The undo rtp-media monitor-type command deletes the type of media streams to be monitored.

By default, the type of media streams to be monitored is not configured.

Format

rtp-media monitor-type { audio | video } ^*

undo rtp-media monitor-type { audio | video } ^*

Only the S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-HI, S6730-H, S6730S-H, S6730-S, and S6730S-S support video.

Parameters

Parameter	Description	Value
audio	Sets the type of media streams to be monitored to audio.	-
video	Sets the type of media streams to be monitored to video.	-

Views

SEA view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To monitor service quality of audio and video applications transported over RTP in real time, you must run the rtp-media monitor-type command to set the type of media streams to be monitored after enabling the SEA function using the sea command.

Precautions

Intelligent O&M for audio and video services takes effect only for unencrypted SIP packets without any tunnel header in IPv4 scenarios.

Example

# Set the type of media streams to be monitored to audio.

<HUAWEI> system-view
[HUAWEI] sea
[HUAWEI-sea] rtp-media monitor-type audio