save stack configuration

Function

The save stack configuration command saves the stack configuration automatically generated for dedicated cable stacking to the flash memory.

By default, the stack configuration automatically generated for dedicated cable stacking is not saved to the flash memory.

Format

save stack configuration

Parameters

None

Views

System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

After dedicated stack cables are connected to ports, stack configuration is automatically generated but not saved to the flash memory. If these cables are removed or other cables are connected, the stack configuration is automatically deleted. To ensure that the stack configuration still takes effect when these cables are removed or other cables are connected, run the save stack configuration command.

Precautions

Removing dedicated stack cables from ports after this command is executed will cause these ports unable to automatically become service ports.
No stack configurations can be manually modified before the stack configuration automatically generated for dedicated cable stacking is saved to the flash memory.

Example

# Save the stack configuration that is automatically generated for dedicated cable stacking to the flash memory.

<HUAWEI> system-view
[HUAWEI] save stack configuration 
Warning: This operation will save all stack configurations to flash. Are you sure you want to continue? [Y/N]:y