set vxlan resource super-mode

Function

The set vxlan resource super-mode command sets the super VXLAN resource mode.

The undo set vxlan resource super-mode command restores the default VXLAN resource mode.

By default, the device supports 4096 BDs.

Only the S5732-H, S5731S-H, S6730-H, S6730S-H, S5731-H, S5720-HI, S5730-HI, and S6720-HI support this command.

Format

set vxlan resource super-mode

undo set vxlan resource super-mode

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When VXLAN is configured, the device supports 4095 BDs by default. If you want more than 4095 BDs, run the set vxlan resource super-mode command to set the super VXLAN resource mode. After this command is configured, the device supports 16000 BDs.

Precautions

After setting the super VXLAN resource mode, save the configuration and then restart the device to make the configuration take effect.
When the super VXLAN resource mode is configured, the forwarding performance of some services may degrade, such as the IP multicast, VPLS, VLAN mapping, Layer 3 traffic forwarding of sub-interfaces, and VLAN stacking services.

Example

# Set the super VXLAN resource mode.

<HUAWEI> system-view
[HUAWEI] set vxlan resource super-mode