snmp-agent trap enable feature-name adpvxlan

Function

The snmp-agent trap enable feature-name adpvxlan command enables the trap function for the ADPVXLAN module.

The undo snmp-agent trap enable feature-name adpvxlan command disables the trap function for the ADPVXLAN module.

By default, the trap function is enabled for the ADPVXLAN module.

Format

snmp-agent trap enable feature-name adpvxlan [ trap-name { hwnotsuppdecapvxlanfragpackets | hwnotsuppdecapvxlanpackets | hwvxlantnlcfgfailed } ]

undo snmp-agent trap enable feature-name adpvxlan [ trap-name { hwnotsuppdecapvxlanfragpackets | hwnotsuppdecapvxlanpackets | hwvxlantnlcfgfailed } ]

Parameters

Parameter	Description	Value
trap-name	Enables the traps of ADPVXLAN events of specified types.	-
hwnotsuppdecapvxlanfragpackets	Enables the device to send trap when the device cannot decapsulate received fragmented VXLAN packets.	-
hwnotsuppdecapvxlanpackets	Enables the device to send trap when the VXLAN-incapable device failed to decapsulate received VXLAN packets.	-
hwvxlantnlcfgfailed	Enables the device to send trap when the device failed to deliver entries during VXLAN tunnel establishment due to a hash conflict.	-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

The ADPVXLAN module is not configured with the function of excessive traps. To enable the traps of one or more events, you can specify trap-name.

Example

# Enables the device to send trap when the device cannot decapsulate received fragmented VXLAN packets.

<HUAWEI> system-view
[HUAWEI] snmp-agent trap enable feature-name adpvxlan trap-name hwnotsuppdecapvxlanfragpackets