smart-antenna { enable | disable }

Function

The smart-antenna { enable | disable } command enables or disables the smart antenna function for an AP.

The undo smart-antenna command restores the smart antenna function of an AP to the default state.

By default, the smart antenna function is disabled for AP7030DE, AP7050DE, and AP7052DE.

Format

smart-antenna { enable | disable }

undo smart-antenna

Parameters

None

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the smart antenna function is enabled, an AP can select a proper antenna array based on STAs' locations, improving signal strength and user experience.

Precautions

The AirEngine 8760-X1-PRO, AirEngine 6760-X1, AirEngine 5760-51, AirEngine 5760-22W, AirEngine 5760-22WD, AP2051DN, AP2051DN-E, AP2051DN-S, R251D, R251D-E, AP4050DE-M, AP4050DE-M-S, AP4050DE-B-S, AP3050DE, AP5510-W-GP, AirEngine 5760-10, AP7030DE, AP7050DE, and AP7052DE support the smart antenna function.

Example

# Enable the smart antenna function for an AP.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name default
[HUAWEI-wlan-radio-2g-prof-default] smart-antenna enable