smart-antenna throughput-triggered-training

Function

The smart-antenna throughput-triggered-training command sets a sudden performance change threshold that triggers smart antenna training.

The undo smart-antenna throughput-triggered-training command restores the default sudden performance change threshold that triggers smart antenna training.

The default sudden performance change threshold that triggers smart antenna training is 10%.

Format

smart-antenna throughput-triggered-training threshold threshold

undo smart-antenna throughput-triggered-training threshold

Parameters

Parameter	Description	Value
threshold threshold	Specifies a sudden performance change threshold that triggers antenna training.	The value is an integer that ranges from 10 to 50, in percentage. In addition, the value must be a multiple of 10.

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

In a smart antenna system, the device monitors performance (throughput) of transmit ends. If the detected throughput of a transmit end exceeds the sudden performance change threshold specified using the smart-antenna throughput-triggered-training command, a new round of antenna training is triggered.

In a good air interface environment, set a high sudden performance change threshold to prevent frequent antenna training from affecting user services.
In a poor air interface environment, set a low sudden performance change threshold to improve the WLAN's anti-interference capability.

Example

# Set the sudden performance change threshold that triggers antenna training to 10%.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name default
[HUAWEI-wlan-radio-2g-prof-default] smart-antenna throughput-triggered-training threshold 10