smart-antenna training-interval

Function

The smart-antenna training-interval command sets the smart antenna training interval.

The undo smart-antenna training-interval command restores the default smart antenna training interval.

The default smart antenna training interval is auto, indicating that a smart antenna is trained in self-adaptation mode.

Format

smart-antenna training-interval { training-interval | auto }

undo smart-antenna training-interval

Parameters

Parameter	Description	Value
training-interval	Indicates the smart antenna training interval.	The value is an integer that ranges from 10 to 600, in seconds.
auto	Indicates that a smart antenna is trained in self-adaptation mode.	-

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

You can run the smart-antenna training-interval command to set the smart antenna training interval. When the period since the last round of smart antenna training exceeds the specified interval, a new round of smart antenna training is triggered.

Configure the smart antenna training interval based on actual situations.

A short antenna training interval causes frequency antenna training and affects user services.
A long antenna training interval causes the device's failure to switch the antenna combination in time to adapt to WLAN environment changes.

When the default smart antenna training interval is restored, that is, smart antennas are trained in self-adaptation mode, the device adaptively calculates the antenna training interval based on the number of concurrent STAs.

Example

# Set the smart antenna training interval to 100 seconds.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name default
[HUAWEI-wlan-radio-2g-prof-default] smart-antenna training-interval 100