smart-roam quick-kickoff-threshold { check-snr | check-rate }

Function

The smart-roam quick-kickoff-threshold { check-snr | check-rate } command sets the mode for triggering the function of quickly disconnecting STAs.

The undo smart-roam quick-kickoff-threshold command restores the default mode for triggering the function of quickly disconnecting STAs.

The default mode for triggering the function of quickly disconnecting STAs is check-snr.

Format

smart-roam quick-kickoff-threshold { check-snr | check-rate }^*

undo smart-roam quick-kickoff-threshold

Parameters

Parameter	Description	Value
check-snr	Specifies that the function of quickly disconnecting STAs is triggered by checking the SNR of STAs.	-
check-rate	Specifies that the function of quickly disconnecting STAs is triggered by checking the rate of STAs. The rate here refers to the negotiated rate based on the protocol and signal strength when a STA associates with an AP, instead of the actual rate of the STA.	-

Parameter

Description

Value

check-snr

Specifies that the function of quickly disconnecting STAs is triggered by checking the SNR of STAs.

check-rate

Specifies that the function of quickly disconnecting STAs is triggered by checking the rate of STAs.

The rate here refers to the negotiated rate based on the protocol and signal strength when a STA associates with an AP, instead of the actual rate of the STA.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the function of quickly disconnecting STAs is enabled, you can run the smart-roam quick-kickoff-threshold { check-snr | check-rate } command to set the mode for triggering the function of quickly disconnecting STAs, and set the threshold for quickly disconnecting STAs. When the SNR or access rate of a STA detected by an AP is lower than the specified threshold, the AP disconnects the STA. The STA then can connect to or roam to another AP with stronger signals.

Prerequisites

The function of quickly disconnecting STAs has been enabled using the undo smart-roam quick-kickoff-threshold disable command.

Follow-up Procedure

Run the smart-roam quick-kickoff-threshold command to set the threshold for quickly disconnecting STAs.

Example

# Set the mode for triggering the function of quickly disconnecting STAs to check-rate.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] undo smart-roam quick-kickoff-threshold disable
[HUAWEI-wlan-rrm-prof-default] smart-roam quick-kickoff-threshold check-rate