smart-roam quick-kickoff-threshold disable

Function

The smart-roam quick-kickoff-threshold disable command disables the function of quickly disconnecting STAs.

The undo smart-roam quick-kickoff-threshold disable command enables the function of quickly disconnecting STAs.

By default, the function of quickly disconnecting STAs is enabled.

Format

smart-roam quick-kickoff-threshold disable

undo smart-roam quick-kickoff-threshold disable

Parameters

None

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the function of quickly disconnecting STAs is enabled using the undo smart-roam quick-kickoff-threshold disable command, and the threshold for quickly disconnecting STAs is specified, the AP disconnects STAs whose SNR or access rate is lower the specified threshold. The STAs then can connect to or roam to another AP with stronger signals.

Follow-up Procedure

Run the smart-roam quick-kickoff-threshold { check-snr | check-rate } command to set the mode for triggering the function of quickly disconnecting STAs, and the smart-roam quick-kickoff-threshold command to set the threshold for quickly disconnecting STAs. The AP will disconnect STAs whose SNR or access rate is lower the specified threshold.

Example

# Enable the function of quickly disconnecting STAs.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] undo smart-roam quick-kickoff-threshold disable