sta-load-balance dynamic steer-restrict probe-threshold

Function

The sta-load-balance dynamic steer-restrict probe-threshold command sets the maximum number of times non-target APs suppress probing of STAs during STA steering.

The undo sta-load-balance dynamic steer-restrict probe-threshold command restores the default maximum number of times non-target APs suppress probing of STAs during STA steering.

By default, the maximum number of times non-target APs suppress probing of STAs during STA steering is 5.

Format

sta-load-balance dynamic steer-restrict probe-threshold probe-threshold

undo sta-load-balance dynamic steer-restrict probe-threshold

Parameters

Parameter	Description	Value
probe-threshold	Specifies the maximum number of times non-target APs suppress probing of STAs during STA steering.	The value is an integer that ranges from 0 to 10.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a STA is triggered to steer to a specified target AP, non-target APs will suppress association of the STA temporarily to improve the STA's steering success rate. You can run the sta-load-balance dynamic steer-restrict probe-threshold command to set the maximum number of times non-target APs suppress probing of STAs during STA steering.

Precautions

You can set a larger value of this parameter to improve the STAs' steering success rate, which, however, may affect users' network experience.

The default value is applicable to mainstream STAs. You are advised to retain the default value. If users' service experience deteriorates due to STA steering, set a smaller value for this parameter.

Example

# Set the maximum number of times non-target APs suppress probing of STAs during STA steering to 4 in RRM profile default.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] sta-load-balance dynamic steer-restrict probe-threshold 4