The sta-load-balance dynamic steer-restrict restrict-time command sets the duration within which non-target APs suppress association of STAs during STA steering.
The undo sta-load-balance dynamic steer-restrict restrict-time command restores the default duration within which non-target APs suppress association of STAs during STA steering.
By default, the duration within which non-target APs suppress association of STAs during STA steering is 5 seconds.
sta-load-balance dynamic steer-restrict restrict-time restrict-time
undo sta-load-balance dynamic steer-restrict restrict-time
Parameter |
Description |
Value |
|---|---|---|
restrict-time |
Specifies the duration within which non-target APs suppress association of STAs during STA steering. |
The value is an integer that ranges from 0 to 10, in seconds. |
Usage Scenario
When a STA is triggered to steer to a specified target AP, non-target APs will suppress association of the STA temporarily to improve the STA's steering success rate. You can run the sta-load-balance dynamic steer-restrict restrict-time command to set the duration within which non-target APs suppress association of STAs during STA steering.
Precautions
You can set a larger value of this parameter to improve the STAs' steering success rate, which, however, may affect users' network experience.
The default value is applicable to mainstream STAs. You are advised to retain the default value. If users' service experience deteriorates due to STA steering, set a smaller value for this parameter.
# Set the duration within which non-target APs suppress association of STAs during STA steering to 4 seconds in RRM profile default.
<HUAWEI> system-view [HUAWEI] wlan [HUAWEI-wlan-view] rrm-profile name default [HUAWEI-wlan-rrm-prof-default] sta-load-balance dynamic steer-restrict restrict-time 4