sta-load-balance static-group

Function

The sta-load-balance static-group command creates a static load balancing group and displays the static load balancing group view.

The undo sta-load-balance static-group command deletes a static load balancing group.

By default, no static load balancing group is configured.

Format

sta-load-balance static-group name group-name

undo sta-load-balance static-group { name group-name | all }

Parameters

Parameter	Description	Value
name group-name	Specifies the name of a load balancing group.	The value is a string of 1 to 35 plaintext characters. It does not contain any question mark (?) and cannot begin or end with double quotation marks (" ").
all	Deletes all static load balancing groups.	-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

In static load balancing mode, APs providing the same services are manually added to a load balancing group. When a STA needs to access a WLAN, it sends an Association Request packet to an AC through an AP. The AC determines whether to allow access from the STA according to the load balancing algorithm.

To configure static load balancing, run the sta-load-balance static-group command in the WLAN view to create a static load balancing group and member (static load balancing group view) command to add APs to the group.

Example

# Configure the static load balancing group named new.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] sta-load-balance static-group name new
[HUAWEI-wlan-sta-lb-static-new]